Microscope Accessories and Replacement Parts
General accessories and parts for use with microscopes. Products include lens oil, lens cleaner, slide dispensers, microscope covers, vessel holders, light cubes, and flow cells.
Many parts of your microscope can be updated or replaced including microscope lamps, lenses, and eyepieces. Replacement lamps, light sources, and power cords can extend the working lives of your microscopy equipment. New or replacement objectives and lenses can help increase the total magnification available with your microscope.
Add greater magnification or exchange your eyepiece for one with a reticule to more easily estimate the sizes of the items being viewed.
Replace or update your mechanical stage or clamps or add cell culture vessel adapters to facilitate specimen positioning.
Condensers can also be replaced, and conversion kits are available to add phase contrast, polarization, fluorescence, or other capabilities to your current system.
Some microscopes can be adapted for use with still or video cameras. Look for cameras and adapters designed for your specific microscope brand. Film and documentation-related products may also be available to support your record-keeping.
Temporary, semi-permanent, and more long-term slide storage options include:
- Slide racks that securely hold slides during staining procedures
- Folding fiberboard or plastic slide holders with horizontal indentations that keep microscope slides in place
- Slide storage boxes with vertical dividers; made from fiberboard, plastic, and wood and available in multiple sizes
- Slide holders and mailers for transporting slides safely
- Slide storage systems and cabinets for large quantities of slides or archival storage
Abcam TBB, casein kinase-2 (CK2) inhibitor, 10MG
MW 434.71 Da, Purity >98%. Selective, cell-permeable casein kinase-2 (CK2) inhibitor (IC₅₀ = 0.5 μM). Acts in an ATP/GTP competitive manner. Induces apoptosis.
The product is subject to the following: Abcam Restricted Use Statement
Abcam TBB, casein kinase-2 (CK2) inhibitor, 50MG
MW 434.71 Da, Purity >98%. Selective, cell-permeable casein kinase-2 (CK2) inhibitor (IC₅₀ = 0.5 μM). Acts in an ATP/GTP competitive manner. Induces apoptosis.
The product is subject to the following: Abcam Restricted Use Statement
Electron Microscopy Sciences Standard Pin SEM Stub Large slotted 1-1/4" head with 1/2" Pin, Aluminum, 1/8" Pin diameter
Large slotted head pin stub mount are for Leica, Cambridge, LEO, FEI, Phillips, Zeiss, and Camscan SEMs specimen mounts. Made from lathe finished ultra-pure aluminum.
Head: 1-1/4"
Pin height: 1/2"
Pin diameter: 1/8"
Electron Microscopy Sciences SEM Hitachi S-450 M4 Mount Plain Surface 5/8",1/4" height, Carbon
Hitachi S-450 SEM mounts with M4 tapered hole and female thread. Made from spectroscopically pure carbon.
Head: 5/8"
Height: 1/4"
Electron Microscopy Sciences Static Master 3" Replacement Cartridge
Easily install a new cartridge without returning the brush to the factory.
Electron Microscopy Sciences 8x Loupe with Scale, 30 mm Field of vision
Loupe with 8x magnification.
OD: 24 mm
Scale: 10 mm with 0.1 mm divisions
Field of vision: 30 mm
Weight: 30 g
Dimension: 40x40x44mm
Electron Microscopy Sciences JEOL JSM 840 SEM Cylinder Mount 1/2" surface, 1/4" height, Aluminum
Cylinder specimen mounts are for use with JEOL JSM-840 scanning electron microscopes. The mounts are made from ultra-pure aluminum with standard lathe finish.
Head: 1/2"
Height: 1/4"
Electron Microscopy Sciences ISI, ABT, Topcon SEM Cylinder Mount 23.7 mm surface, 9.5 mm height, Aluminum
ISI, ABT, Topcon specimen mounts are made from ultra-pure aluminum, lathe finish.
Head: 23.7 mm
Height: 9.5 mm
Electron Microscopy Sciences JEOL ISI SEM Cylinder Mount 5/8" surface, 5/8" height, Aluminum
Cylinder specimen mounts are for use with JEOL and ISI scanning electron microscopes. The mounts are made from ultra-pure aluminum with a standard lathe finish.
Head: 5/8"
Height: 5/8"
Electron Microscopy Sciences JEOL SEM Cylinder Mount 10 mm Head, 10 mm height, Aluminum
Cylinder specimen mounts are for use with JEOL scanning electron microscopes. The mounts are made from ultra-pure aluminum with standard lathe finish.
Head: 3/8"
Height: 3/8"